Filter By:
- Parts & Accessories (63)
- Combos/Systems (72)
- Headlights (124)
- Taillights (93)
- Show More Brands
- Show Fewer Brands
Lighting

A classic bike light with a modern twist, the Classic Drive 500+ front light beams 500 lumens (up to 80 hours of runtime) via a single high-output LED emitter. It's built around a sleep cylindrical housing that offers a compact and lightweight form factor.
Its waterproof USB-C charging capability is convenient for recharging(cable not included). The machined aluminum construction ensures durability and efficient heat dissipation. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from six different output modes, from the highly disruptive Daytime Flash mode to the long-lasting 80-hour runtime in Femto Mode. The Infinite Light Power Pack+ compatibility offers versatility and extended runtimes.
- Max 500 lumens / 80-hour runtime in Femto mode
- Max 500 lumens / 80-hour runtime in Femto mode
- Classic Lezyne styling with modern technology
- Machined aluminum construction
- Daytime Flash mode with Highly Disruptive Pattern
- Waterproof USB-C charging port with charge indicator
- Infinite Light Power Pack+ Compatible for extended run times
- Rigorously tested to IPX7 Waterproofing standards
- 1900 mAh battery capacity

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters.
- 900 lumen output
- All New Collimator Lens, produces a generous even widespread beam
- 4 Light Levels plus 1 Daylight Flash Mode
- FL1 Standard IP64, dust and water-resistant
- High output light using a CREE LED at 6000k
- Ultra lightweight 900 lumen head light, weighing in at only 130g including mount
- Secure on and off-road handlebar mount
- Fits standard and oversize 35mm handlebars
- Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately)
- Convenient USB rechargeable
- Low battery indicator
- Lock Mode, perfect for use during storage and transporting the light.
Press and hold power button for 8-10 seconds to lock out operation of light.
USB RECHARGEABLE
The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA.
MOUNTING OPTIONS
Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time.
WHAT'S INCLUDED?
- LED Light Head
- Internal Li-Ion Battery
- Handlebar Mount fit up to 35mm
- USB Charging Cable

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series

$2.99
$5.00
40% Off
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility.
- Stainless steel spring clip for secure mounting.

$2.99
$5.00
40% Off
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem.
- Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look.
- Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike.
- Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

$3.99
$6.00
34% Off
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack.
- Vertical CPSC hole pattern.
- This mount can attach to the Horizontal Din hole pattern.
- Specialized single hole pattern for the Pizza Rack.
- Mounts Stix light horizontally.
- Includes all mounting hardware.

$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL

$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

$5.00
Replacement bracket for Pico and Tigermoth lights.
- Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

$5.00
- Fits seatpost (up to 31.8mm) or seatstay
- Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light
- Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot

$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts

$6.59
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal

$6.99
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.

$7.99
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

$7.99
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

$7.99
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body

$7.99
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body

$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

$8.99
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
Page 1 of 12
Next page